DESCRIPTION = "Armatura-ural for milling cutter!!!(MM)(*.cnc)"
FILE_EXTENSION = "cnc"
UNITS = MM
END_OF_LINE = "[13][10]"
FORMAT = [S|@|S|1.0]
FORMAT = [F|#|F|1.0]
FORMAT = [X|@|X|1.4]
FORMAT = [Y|@|Y|1.4]
FORMAT = [Z|#|Z|1.4]
FORMAT = [IA|@|I|1.4]
FORMAT = [JA|@|J|1.4]
FORMAT = [Angle|@|A|1.4]
FORMAT = [XH|@|X|1.4]
FORMAT = [YH|@|Y|1.4]
FORMAT = [ZH|@|Z|1.4]
FORMAT = [N|@|N|1.0]
LINE_NUM_START     = 0 
LINE_NUM_INCREMENT = 1 
LINE_NUM_MAXIMUM   = 99999 
START = "(Armatura-ural.com frezer v1.0)"
START = "[N] G00 [ZH] (G00 [ZH] G00 [ZH])"
START = "[N] M03 (M03 M03)"
; Program moves
FIRST_RAPID_RATE_MOVE  = "[N] G00 [X] [Y] [Z] (G00 [X] [Y] [Z] G00 [X] [Y] [Z])"
;
FIRST_FEED_RATE_MOVE   = "[N] G01 [X] [Y] [Z] (G01 [X] [Y] [Z] G01 [X] [Y] [Z])"
FEED_RATE_MOVE         = "[N] G01 [X] [Y] [Z] (G01 [X] [Y] [Z] G01 [X] [Y] [Z])"
;
FIRST_CW_ARC_MOVE      = "[N] G02 [X] [Y] [IA] [JA] ([Angle] G02 [X] [Y] [IA] [JA] [Angle] G02 [X] [Y] [IA] [JA] [Angle])"
CW_ARC_MOVE            = "[N] G02 [X] [Y] [IA] [JA] ([Angle] G02 [X] [Y] [IA] [JA] [Angle] G02 [X] [Y] [IA] [JA] [Angle])"
;
FIRST_CCW_ARC_MOVE     = "[N] G03 [X] [Y] [IA] [JA] ([Angle] G03 [X] [Y] [IA] [JA] [Angle] G03 [X] [Y] [IA] [JA] [Angle])"
CCW_ARC_MOVE           = "[N] G03 [X] [Y] [IA] [JA] ([Angle] G03 [X] [Y] [IA] [JA] [Angle] G03 [X] [Y] [IA] [JA] [Angle])"
;
;NEW_SEGMENT_POST_TOOLCHANGE= "(Tool Number:[T]) ([TOOLDESC])"
NEW_SEGMENT_POST_TOOLCHANGE= "[N] M03(M03 M03)"
;
; End of file
;
END = "[N] G00 [ZH] (G00 [ZH] G00 [ZH])"
END = "[N] G00 [XH] [YH] (G00 [XH] [YH] G00 [XH] [YH])"
END = "[N] M05 (M05 M05)"
END = "[N] M30 (M30 M30)"
; M30 = program end and rewind